Tg ImplaCem Dual Curing Resin Based Implant Cement

Description

Manufacturer: Technical & General

TgImplaCem is the most up-to-date developed luting cement, dual curing, semi-permanent, resin based occlusally stable specially developed for implant-retained restorations and all super structures such as crowns and bridges and is suitable with all material combinations.

• Passes through a plastic phase before final setting thus allowing easy, convenient & clean removal of excess cement
• Very low displacement resistance and thus extremely low film thickness
• Due to highly cross-linked, ductile polymer structure, high compressive strength and hermetic sealing are achieved
• Luted restorations are effortlessly removed without damage with standard devices (Crown Butler, Corona Flex)
• Excess material can easily be removed in large pieces (no crumbling) during plastic phase
• Compatible with all conventional material combination, i.e.Zirconium and metal frameworks, ceramics, titanium
• Antibacterial, eugenol-free, odourless and tasteless; natural opaque colour for screening metallic abutments.

Instructions for use

• Carefully check fit, occlusion and proximal contact points. Complete finishing procedures.
• Bleed the syringe, insert the plunger in the body of the cartridge. Remove the cap and attach mixing cannula. Dispense the material with uniform pressure.
• Apply a thin layer of TgImplaCem directly into the superstructure, carefully position the restoration on the implant abutment with slight pressure; then press down firmly.
• Remove excess material during the gel/plastic phase, after around 2-3 minutes, with a suitable instrument.
• The working time at room temperature is around 80 seconds. When tgimplaCem is used with translucent material s (e.g.Thin layers of ceramic provisional crowns and bridges),increase exposure to light through the material to 30-40 seconds per surface.

Colour: Natural Opaque Shade

Packing: Each pack contains 1 x 5ml syringe + 10 mixing tips